Filter
Top Products
41
SETTING THE SYSTEM SETUP
ENGLISH
• AMP ASSIGN : To assign the surround back channels' power
amplifier correctly depending on how to use the
speakers.
• SUBWOOFER MODE : To select the desired subwoofer mode.
• HDMI AUDIO OUT : To output the digital audio signals from the
HDMI MONITOR OUT connector.
• TONE CONTROL : To adjust the tone (bass and treble) as
desired.
• CINEMA EQ : To select the desired cinema EQ mode.
• MOMENTARY OSD : To turn on or off the OSD that shows the
status corresponding to each operation
momentarily.
• OSD POSITION ADJUST : To adjust the position of the
momentary OSD and the OSD menu.
When selecting the items other than OSD
POSITION ADJUST
When selecting the AMP ASSIGN
• The surround back channels' power amplifier can drive
the surround back speakers, the ROOM 2 speakers or
the front bi-amp capable speakers. Depending on how
to use the speakers, you should assign the power
amplifier correctly. (For details, refer to "CONNECTING
SPEAKERS" on page 9 and "CONNECTING ROOM 2
OUTS" on page 11.)
BACKROOM 2 : When connecting this receiver
to the surround back speakers
and the ROOM 2 speakers
both, the power amplifier
automatically drives the
surround back speakers or the
ROOM 2 speakers depending
on whether the ROOM 2
function is turned off or on.
BI - AMP : To drive the front bi-amp capable speakers
when connecting the FRONT and the
SURROUND BACK/MULTI channels to
them.
SURR BACK : To drive the surround back speakers
when connecting the SURROUND
BACK/MULTI channels to them.
ROOM 2 : To drive the ROOM 2 speakers when
connecting the ROOM 2 channels to them.
1. Press the CURSOR UP()/DOWN() buttons
to select the desired item.
2. Press the CURSOR LEFT()/RIGHT()
buttons to set the selected item as desired.
RD-7503(A) 2008.11.4 1:45 PM 페이지 41