Filter
Top Products
ENGLISH
8
Notes :
• When the VIDEO MODE is set to "AUTO" or "HDMI", if the 480i ~ 1080i video signals are input into the HDMI
IN connector, the HDMI video signals are output from the HDMI MONITOR OUT only.
• When the VIDEO MODE is set to "AUTO" or "COMPONENT" and no video signals are input into the HDMI IN,
if 480i video signals are input into the COMPONENT INs, the component video signals are output from the
MONITOR OUTs.
However, if 480p ~ 1080i video signals are input, the component video signals are output from the
COMPONENT and the HDMI MONITOR OUTs.
• When the VIDEO MODE is set to "AUTO", "HDMI" or "COMPONENT", if 1080p video signals are input into
the HDMI IN or the COMPONENT INs, no video signals will be output from the HDMI or the COMPONENT
MONITOR OUTs regardless of VIDEO SCALING setting.
• When the component video signals or the HDMI video signals are input and these signals are output from the
MONITOR OUTs, the momentary OSD cannot be displayed.
Audio conversion
• Depending on the AUDIO MODE setting, this unit can convert the analog audio signals (which are input into
the (analog) AUDIO INs) or the digital audio signals (which are input into the OPTICAL or the COAXIAL
DIGITAL IN) to the PCM 2 channel signals and output them from the HDMI MONITOR OUT. (For details,
refer to "When selecting the AUDIO MODE" on page 58.)
• The digital audio signals (which are input into the HDMI IN, the OPTICAL or the COAXIAL DIGITAL IN) can
be output from the OPTICAL DIGITAL OUT.
However, depending on the digital audio signal format input into the HDMI IN, some digital signals cannot be
output from the OPTICAL DIGITAL OUT.
The flow of the audio signals
Note :
• The analog audio signals which are input from the EXTERNAL INs cannot be output from any AUDIO OUTs.
Continued