Filter
Top Products
ENGLISH
39
Memorizing the adjusted channel levels
• The "1" of "REFERENCE 1" indication flickers for
several seconds.
• You can memorize the adjusted channel levels
into preset memory("REFERENCE 1",
"REFERENCE 2") and recall the memorized
whenever you want.
• The adjusted channel levels have now been
memorized into the selected memory.
Recalling the memorized channel levels
• "REFERENCE 1" (or "CALIBRATE") is
displayed for several seconds.
• If the channel level mode display disappears,
press this button again.
• Then the channel levels memorized into the
selected preset memory are recalled.
• If the preset memory disappears, perform the
above step 1 again.
1. After performing the steps 1~4 in "Adjusting the
current channel level" procedure on page 38,
press the (MEMORY/)ENTER button.
2. Select the desired one of REFERENCE 1 and
REFERENCE 2.
2. Select the desired one of REFERENCE 1 and
REFERENCE 2.
3. Confirm your selection.
1. Press the CHANNEL LEVEL button.