Filter
Top Products
45
RECORDING
Recording with TAPE
• The audio and video signals from the desired
input will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the
speakers.
• The analog signals from the EXTERNAL INs as well as the digital signals from the HDMI IN, the OPTICAL or COAXIAL
DIGITAL IN can be heard but cannot be recorded.
• When recording the analog signals from CD, AUX, VIDEO 1~4, be sure to select "ANALOG" for the AUDIO MODE.
(For details, refer to "When selecting the AUDIO MODE" on page 58.)
• When recording the video signals from VIDEO 2~4, be sure to select "COMPOSITE" or "S-VIDEO" for the VIDEO MODE.
(For details, refer to "When selecting the VIDEO MODE" on page 57.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
1. Select the desired input as a recording source
except for TAPE.
1. Select the desired of VIDEO 2 ~ 4 as a recording
source except VIDEO 1.
2. Start recording on the VIDEO 1.
3. Start play on the desired input.
2. Start recording on the TAPE.
3. Start play on the desired input.
Dubbing from video components onto
VIDEO 1
ENGLISH
Dubbing the audio and video signals
separately onto VIDEO 1
Example: When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
1. Select VIDEO 2 as a video recording source.
2. Select CD as an audio recording source.
3. Start recording on the VIDEO 1.
4. Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video
signal from the VIDEO 2 will be dubbed and you
can enjoy them on the TV set and from the
speakers.
Note :
•
Be sure to observe the order of the above steps 1
and 2.