Filter
Top Products
ENGLISH
57
When selecting the HDMI ASSIGN
When selecting the VIDEO ASSIGN
When selecting the AUDIO ASSIGN
• You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 4.
(For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 8.)
• You can select the desired of HDMI 1 ~ HDMI 4.
Note :
• In such a case that a HDMI IN is assigned to two input sources or more, when these input sources are selected,
the uncompressed digital video signals (and digital audio signals when the HDMI AUDIO OUT is set to ON) input
into the same HDMI IN can be output from the HDMI MONITOR OUT of this receiver.
• You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1 ~ 4.
(For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 8.)
• You can select the desired of COMP 1 ~ 3.
Note :
• In such a case that a COMPONENT VIDEO IN is assigned to two input sources or more, when these input
sources are selected, the component video signals can be viewed from the same COMPONENT VIDEO IN.
When selecting the VIDEO MODE
• You should assign the connected DIGITAL INs to the desired of CD, AUX and VIDEO 1 ~ VIDEO 4.
(For details, refer to "CONNECTING DIGITAL INS AND OUT" on page 10.)
• You can select the desired of OPT 1 ~ 4 and COAX 1 ~ 2.
Note :
• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are
selected, the digital audio signals can be heard from the same DIGITAL IN.
Continued
• You can select the video input signal to be output from the MONITOR OUTs.
AUTO : When there are multiple video input signals, the video input signals are detected and the video input signal
to be output from the MONITOR OUTs is selected automatically in the priority order of them :
"HDMI" > "COMPONENT" > "S-VIDEO" > "(composite) VIDEO"
HDMI : The signal that is input into the HDMI IN connector is always played. The HDMI video input signal is output
from the HDMI MONITOR OUT only with no video conversion.
COMPOSITE : The signal that is input into the (composite) VIDEO IN jack is always played.
The composite video signal is converted and output from the MONITOR OUTs.
S-VIDEO : The signal that is input into the S-VIDEO IN jack is always played.
The S-Video signal is converted and output from the MONITOR OUTs.
COMPONENT : The signals that are input into the COMPONENT IN jacks are always played.
The component video signals are converted and output from the MONITOR OUTs.
• For details on the video input signal to be output, refer to "Video conversion" on page 7.
Note :
• When the VIDEO MODE is set to "AUTO" and the HDMI video signals are input into the HDMI IN connector, the
video signals are output from the HDMI MONITOR OUT only.