Filter
Top Products
51
When selecting the desired unit
• You can select either METERS or FEET.
• Once a unit is selected, the distances are
automatically changed in the selected unit.
When setting the distance
• You can set the distance within the range of 0.1 ~ 9.0
meters in 0.1 meter intervals (or 0.5 ~ 30 feet in 0.5
feet intervals).
When selecting the SPEAKER DISTANCE
Note :
• You cannot select the subwoofer and the speakers
set to "NO".
About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the
center, surround and surround back speakers should be the same distance from the main listening position as
the front speakers. By entering the distance between the listening position and each speaker, the delay times of
center, surround and surround back speakers are automatically adjusted to create an ideal listening environment
virtually as if the center, surround and surround back speakers were at their ideal locations respectively.
1. Press the CURSOR UP()/DOWN() buttons to select the SPEAKER DISTANCE, then press the ENTER
button.
2. Press the CURSOR UP()/DOWN() buttons to select the desired item.
3. Press the CURSOR LEFT()/RIGHT() buttons to set the selected item as desired.
4. Repeat the above steps and 3 until the distances are all set as desired.
ENGLISH
R-772(G) 2007.9.17 4:43 PM 페이지 51