Filter
Top Products
ENGLISH
38
OSD Menu Settings
• The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform
the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of
your home theater, and it rarely needs to be changed later.
The OSD menu consists of 6 main menus ; system setup, input setup, speaker / room EQ setup, CH level setup,
sound parameter and multi room setup. These menus are then divided up into various sub-menus.
Notes:
• The OSD menu and the momentary OSD cannot be displayed via the COMPONENT MONITOR OUT and the
HDMI MONITOR OUT jacks.
• Depending on the VIDEO MODE setting and the video connections between this receiver and the video component,
the OSD menu and the momentary OSD cannot be displayed via (COMPOSITE) MONITOR OUT jack, (For details,
refer to "Relationship between the video input signal and the video output signal" on page 6.)
Navigating through the OSD menu
• The explanations here assume you are using the buttons on the remote control when performing the OSD menu
operation. However, you can use the buttons on the front panel as well.
The buttons on the front panel correspond to those on the remote control as shown below.
MULTI
• The main menu will be shown.
• To turn the menu screen off, press this button again.
1. Turn the menu screen on.
2. Select the desired menu using the CURSOR UP()/DOWN() buttons.
R-772(G) 2007.9.17 4:43 PM 페이지 38