Filter
Top Products
ENGLISH
42
. Press the CURSOR LEFT()/RIGHT() buttons to adjust the selected tone as desired.
• The tone level can be adjusted within the range of -10 ~
+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps
and .
OFF : To turn off the cinema EQ function.
ON : To compensate for edgy or shrill movie sound tracks.
When selecting the CINEMA EQ
BLACK : To display the black as the color background of the momentary OSD and the OSD menu.
BLUE : To display the blue.
Note : Only when no video signals are input into this unit, the selected background color will be displayed.
When selecting the BACKGROUND
ON : To turn on the OSD function that shows the status corresponding to each operation on this unit
momentarily.
OFF : To turn it off.
When selecting the MOMENTARY OSD
Note : The momentary OSD cannot be displayed via the COMPONENT MONITOR OUT and the HDMI
MONITOR OUT jacks.
Continued
. Press the CURSOR UP()/DOWN() buttons to select the desired tone mode.
R-772(G) 2007.9.17 4:43 PM 페이지 42