Filter
Top Products
ENGLISH
47
When selecting the NAME
• You can give names to the input sources other than
tuner.
• Up to 7 characters can be entered for each name.
Example: When selecting the VIDEO 1
• The name is stored in the memory.
To resume its factory input source name.
• Make a blank on each digit and press the ENTER
button.
• The first digit flickers.
• Then the selected digit will flicker.
• You can enter the desired among blank, A ~ Z,
a ~ z, 0 ~ 9, (, ), , +, , , -, ., /.
1. Press the CURSOR UP()/DOWN() buttons
to select the desired input source, then press
the ENTER button.
3. Press the CURSOR LEFT()/ RIGHT()
buttons to select the desired digit.
4. Press the CURSOR UP()/DOWN() buttons
to enter the desired character on the flickering
digit.
5. Repeat the above steps 3 and 4 to enter the
desired characters on the rest of the digits.
6. Confirm your entry.
2. Press the CURSOR UP()/DOWN() buttons
to select the NAME, then press the ENTER
button.
R-772(G) 2007.9.17 4:43 PM 페이지 47