Filter
Top Products
(Continued)
■ Test tone
You can check (and adjust) the speaker level by listening to
the sound output from each speaker individually, while stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
1 Press the MENU button repeatedly to make "TEST" ap-
pear.
2 Within 10 seconds, press the ITEM button.
● The test tone will be heard from each speaker, in order,
at about 5 second intervals.
Note:
● While DIGITAL is lit, "R-SURR" and "L-SURR" will be
displayed.
If DIGITAL is not lit, "SURR" will be displayed.
L-FRNT
↓
CENTER
↓
R-FRNT
↓
R-SURR
↓
L-SURR
↓
S-WOOFER
● When the test tone is being output, the indicator for that
speaker will flash.
● The test tone will be heard until the current menu selec-
tion is changed by pressing the MENU button again, or
by selecting some other function.
3 To adjust the speaker level while the test tone is being
output from a particular speaker, press the SET UP (
or ) button.
● The speaker level can be adjusted within a range of
+10dB to -10dB, in 1dB steps.
Notes:
● If "NO" is selected for any individual speaker’s size setting
(page 16), the test tone will not be heard from that
speaker.
● Please note that the front left and front right speaker lev-
els cannot be adjusted using this method.
● When a surround test is performed while DIGITAL is
lit, "R-SURR" and "L-SURR" will be displayed and can
be adjusted. However, if DIGITAL is not lit, "SURR"
will be displayed, and both channels will be adjusted at
the same time.
MENU
ITEM
SET UP
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
1
3
2
HT-DD5000(SEC) TINSE0009SJZZ
19