Filter
Top Products
FLAT HEAVY 1 HEAVY 2
SOFT 2 SOFT 1
1
23
EQUALIZER
(Continued)
-10 9 +9 +10
SUB WOOFER
LEVEL ( )
■ Pre-programmed equalizer
(Main unit operation)
1 Press the EQUALIZER button.
● The current mode setting will be displayed.
2 Within 3 seconds, turn the jog dial to change to a different
mode.
3 Within 5 seconds, press the ENTER button.
(Remote control operation)
When the EQUALIZER button is pressed, the current mode
setting will be displayed. To change to a different mode,
press the EQUALIZER button repeatedly.
FLAT HEAVY 1 HEAVY 2
SOFT 2 SOFT 1
FLAT HEAVY 1 HEAVY 2
SOFT 2 SOFT 1
FLAT: The sound is not modified.
HEAVY 1: Bass and treble are slightly emphasized.
HEAVY 2: Bass and treble are emphasized more.
SOFT 1: Treble is cut a little.
SOFT 2: Treble is reduced a lot.
Note:
When the equalizer mode is being used, the Dolby Pro Logic
Surround mode is canceled.
■ Sub woofer output level
(Remote control operation)
When the SUB WOOFER LEVEL ( / ) button is pressed,
the sub woofer output level can be changed.
X-BASS
X-BASS
(Main unit) (Remote control)
■ Extra bass (X-BASS)
(Main unit/remote control operation)
Press the X-BASS button to emphasize the bass region of
the frequency spectrum. To cancel the extra bass mode,
press the X-BASS button. "X-BASS" will go out.
HT-DD5000(SEC) TINSE0009SJZZ
12