Filter
Top Products
23
The operating menu
Working with the operating menu
By way of example of the “Tune” menu, this section describes how to use
the operating menu.
After switching the receiver on, the status display is shown on the display
panel.
Getting into the operating menu
̈ Press the jog dial.
The status display is replaced by the operating menu.
The “Tune” menu is displayed together with its current setting. The
position of a menu within the operating menu is illustrated by a graphic
in the upper display margin (the “Tune” menu is on the very left of the
operating menu).
Selecting a menu
̈ Turn the jog dial
7 until the icon of the desired menu is in the center
of the display.
̈ Press the jog dial
7 to get into the setting mode of the selected menu.
The icon of the menu is displayed and the current setting starts
flashing. In addition, the green backlighting of the save button
8
flashes.
Adjusting a setting
̈ Turn the jog dial
7 until the desired setting appears.
̈ Press the jog dial
7 to confirm the selected setting.
Depending on the selected menu, it is possible that the next setting
that can be changed and confirmed by turning and pressing the jog
dial
7 can start flashing.
Storing a setting
̈ Press the save button
8 to store the setting.
An animation appears on the display, indicating that the setting has
been stored. The display then changes to the selection mode of the
operating menu.
Exiting the operating menu/cancelling an entry
You can exit the operating menu or cancel an entry at any time.
̈ Press the esc button
6.
An animation appears. The display then returns to the previous menu
level. To return to status display, you may have to press the
esc button
6 several times in succession.
M
H
z
790.800
03.03
BANK
CH
COM
AF
Tune
790.
800
Ban
k
B.Ch
1.0
1
MHz
Tune
790.
800
Ban
k
B.Ch
1.0
1
MHz
790.
800
MHz
B.Ch
U.01
776
UHF MHz
866
776.
866
MHz
B.Ch
3.01
450
UHF MHz
950
esc
save
clock
sync
M
H
z
0
.800
.
03
BANK
CH
COM
AF
EM3732_516551_0108_Sp6.book Seite 23 Dienstag, 18. Dezember 2007 11:55 11