Filter
Top Products
6
The EM 3731/3732 receiver family
The receivers have seven frequency banks.
Distribution of the receiving frequencies within the frequency banks 1 to 6:
The varying accumulation of frequencies within the frequency banks
allows you to use as many channels as possible in a crowded frequency
band.
Channel
Frequency bank
1 2 3 4 5 6 U
Optimized for
the maximum
number of
channels
Optimized for
maximum
transmission
reliability
1 The receiving frequencies are
factory-preset (see enclosed
frequency table) and cannot be
changed.
The receiving frequencies
can be freely selected
within the switching
bandwidth.
2
…
max. 60
CAUTION! Risk of reception interference!
If – within the receiver’s frequency range – transmitters
transmit on channels from different frequency banks,
reception can be subject to interference and inter-modulation.
Only the factory-preset frequencies within the frequency
banks “1” to “6” are interference and inter-modulation free.
̈ Set all transmitters of a multi-channel system to different
channels within the same frequency bank.
Frequency
bank
Distribution of the receiving frequencies within the
frequency banks
1
2
3
4
5
6
EM3732_516551_0108_Sp6.book Seite 6 Dienstag, 18. Dezember 2007 11:55 11