Filter
Top Products
40
Using the components
̈ Repeatedly press ̆/̄ until “RESET” appears in the
display.
̈ Press the SET button.
“RST.OK” flashes on the display.
̈ Press the SET button to load the factory-preset
default settings on the device.
“DONE” briefly appears on the display. The
bodypack transmitter / the wireless microphone is
reset to the following factory-preset default
settings:
y Channel: 1
y Line input: switched off (only bodypack
transmitter)
y Input sensitivity
– Line input: –24 dB (only bodypack transmitter)
– Microphone input: –12 dB
y Lock mode: deactivated
y Infra-red service interface: deactivated
Activating/deactivating the lock mode
The lock mode prevents the bodypack transmitter /
the wireless microphone from being accidentally
programmed or switched off during operation.
To activate the lock mode:
̈ Press the SET button.
The operating menu appears. The first menu item
“CHAN” flashes.
̈ Repeatedly press ̆/̄ until “LOCK” appears in the
display.
PEAK
ON/OFF
ON/OFF
SET
SET
MUTE
LOW BATT
Wireless microphone
Bodypack transmitter