Filter
Top Products
37
Using the components
̈ Connect the external audio source, switch it on and
start playback.
̈ Press the SET button µ.
The operating menu appears. The first menu item
“CHAN” flashes.
̈ Repeatedly press the ̆/̄ rocker button ¾ until
“SENSIT” flashes on the display and the LINE level
display ቦ appears.
̈ Press the SET button µ.
The current input sensitivity and the LINE level
display ቦ appear on the display.
̈ Press the ̆/̄ rocker button ¾ to change the
input sensitivity so that the LINE level display ቦ
shows full deflection during the loudest passages,
but the yellow LED PEAK º never lights up.
̈ Press the SET button µ to permanently store the
setting.
“STORED” briefly appears on the display. The
sensitivity of the line input is now stored.
Changing the sensitivity of the microphone input on
the bodypack transmitter
To adjust the sensitivity of the microphone input to
match the connected microphone:
̈ Connect the microphone, position it correctly (refer
to the microphone's operating manual) and speak
into the microphone as usual.
̈ Press the SET button µ.
The operating menu appears. The first menu item
“CHAN” flashes.
̈ Repeatedly press the ̆/̄ rocker button ¾ until
“SENSIT” flashes on the display and the MIC level
display ብ appears.
̈
Press the SET button µ.
The current input sensitivity and the MIC level
display ብ appear on the display.
̈ Press the ̆/̄ rocker button ¾ to change the
input sensitivity so that the MIC level display ብ
LINE
CH 03
MIC
ቦ
LINE
CH 03
MIC
ብ