Filter
Top Products
32
Using the components
Setting the channel
To set the complete system to a certain channel,
proceed as follows:
1. Set the bodypack transmitter/wireless
microphone to the desired channel (see next
section).
2. Set any of the receivers to the same channel (see
“Setting the receiver channel” on page 33).
3. Automatically set all other receivers to the same
channel using the channel copy function (see
“Setting the receiver channel(s) using the channel
copy function” on page 34).
Setting the channel on the bodypack transmitter/
wireless microphone
To set the bodypack transmitter or the wireless
microphone to the desired channel, use the device's
operating menu. An overview of the operating menus
is given from page 43 onwards.
̈ Make sure that the lock mode is deactivated (see
“Activating/deactivating the lock mode” on
page 40).
̈ Press the SET button.
The operating menu appears. The first menu item
“CHAN” flashes.
̈ Press the SET button.
The current channel flashes.
PEAK
ON/OFF
ON/OFF
SET
SET
MUTE
LOW BATT
Wireless microphone
Bodypack transmitter