Filter
Top Products
35
Using the components
Muting the devices
Muting the bodypack transmitter
̈ Push the MUTE switch · to the left, to “MUTE”.
̈ The red LED LOW BATT/MUTE ¶ lights up
permanently. The MIC level display ብ no longer
shows any deflection. The bodypack transmitter is
muted.
Note:
The muting function (MUTE) mutes the microphone
input » only, not the line input ¿. This function
enables a pre-recorded track to be played through
the line input without being disturbed by the tour
guide's microphone.
To deactivate the muting function:
̈ Push the MUTE switch · back to the right.
The red LED LOW BATT/MUTE ¶ goes out. The MIC
level display ብ and the LINE level display indicate
the current levels.
Muting the wireless microphone
̈ Twist the cap ² at the base of the wireless
microphone until you can see the MUTE switch ¹.
̈ Push the MUTE switch ¹ in the direction indicated
by the arrow.
“MUTE” appears in the display of the wireless
microphone. After 5 minutes “CH OFF” appears in
the display (“Display of the energy saving mode”
on page 14).
To deactivate the muting function:
̈ Push the MUTE switch ¹ back to transmit again.
LINE
CH 03
MIC
ብቦ
»
¿
²
¹