Filter
Top Products
18
The operating controls
Indications and displays on the charging
case
Operation indication
The LED POWER ² lights up as long as the mains
supply is switched on.
Temperature indication
The LED TEMP ERROR ¶ lights up if the temperature in
the charging case gets too high (above 40°C). All
charging processes are interrupted until the
temperature drops to a safe level.
Indication for “automatic copying” function
The LED COPY AVAILABLE º lights up green when the
function “automatic copying” is available. This
happens
y when a switched-on receiver is placed in the
charging compartment with channel copy function
(master) µ
y and at least one receiver is placed in one of the
other receiver charging components (slaves, light
blue in the diagram) ´.
The LED
COPY AVAILABLE
º
goes off when the
“automatic copying” function is not available. This
happens
y when the receiver in the charging compartment
with channel copy function (master) µ is switched
off,
y or when the receiver is removed from the charging
compartment with channel copy function
(master) µ
y or all 19 charging compartments (slaves) ´ are
empty.
¶
²
´
µ