Filter
Top Products
24
Putting the components into operation
Inserting/Changing batteries or accupack in the
bodypack transmitter
For powering the transmitter, use either the
rechargeable BA 2015 accupack ´ or two 1.5 V AA
size batteries. Do not use any other rechargeable
batteries!
̈ Open the battery compartment by pressing the two
release buttons ƹ and open the cover ¿.
̈ Insert the batteries or the BA 2015 accupack ´ as
shown in the diagram on the left. Please observe
correct polarity when inserting the batteries/
accupack.
̈ Close the battery compartment cover ¿.
Connecting the microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 7.
̈ Connect the microphone to the bodypack
transmitter's microphone input ».
̈ Lock the plug by screwing down the coupling ring.
̈ Adjust the sensitivity of the microphone input, as
described on page 37.
Connecting external audio source to the bodypack
transmitter
You can connect an external audio source, such as a CD
player, MP3 player, tape player, etc. to the bodypack
transmitter. (Please note that you cannot connect a
second microphone.) Both signals – the microphone
ƹ
ƹ