Filter
Top Products
33
Using the components
̈ Press ̆/̄ to change the channel.
If you press ̆, the display jumps to the next
channel; if you press ̄, the display jumps to the
previous channel.
By pressing and holding the ̆/̄ buttons, the
display cycles continuously (repeat function).
̈ Press the SET button to permanently store the
selected channel.
̈ “STORED” appears briefly in the display. The
bodypack transmitter or the wireless microphone is
now transmitting on the selected channel. The last
menu selected is shown.
To exit the operating menu:
̈ Use ̆/̄ to select the menu item “EXIT” and press
the SET button.
The standard display is shown.
Or:
̈ Press and hold the ON/OFF button until the
standard display is shown.
Setting the receiver channel
In order for the receiver to receive the signal from the
bodypack transmitter or the wireless microphone, it
has to be set to the same channel.
To manually set the receiver channel:
̈ Press the ̆/̄ rocker button ´ for channel
selection.
The channel changes. The selected channel is
shown on the channel display ቢ.
If the bodypack transmitter is transmitting on this
channel, the RF signal indication ብ indicates the
field strength of the received RF signal.
Notes:
y By pressing and holding the ̆/̄ rocker button
for channel selection ´, the display cycles
continuously (repeat function).
y After channel 6, the display will return to
channel 1.
6
ብ