Filter
Top Products
8
USER
Keypad Operation
On/Off
Press and release to turn on the K2 keypad. This
will also activate any speakers wired through the speak-
er relay on the back of the K2. If power management is
set up on your keypad, turning on the keypad will also
turn on your amp/receiver and source components. If
you have more than one K2 keypad in your system, this
will occur when you turn on the first keypad.
Press and release to turn off the K2 keypad. This
will interrupt any speakers wired through the keypad’s
speaker relay.
System All On/Off
If you have more than one K2 keypad in your system,
you can issue an All On command by turning on one
keypad and then pressing and holding it for 3 sec-
onds. All other K2 keypads will then turn on. You can
issue an All Off command by turning off any keypad and
then pressing and holding . All K2 keypads will then
turn off. If power management is set up on your keypad,
the All Off command will turn off your amp/receiver and
source components.
System On Indicator
When a keypad is off but the connected audio system is
on, is illuminated and the "SYS ON" icon remains
visible on the display. This feature requires the use of
the status power connection on the K2.
Source Select Key
The key scrolls through up to eight source inputs.
To change sources, press and release . Each time,
a different source name will appear on the keypad dis-
play. You can also press and hold to enter the User
Menu. (See User Menu on next page.)
Volume Up/Down Keys
The audio output volume of the amplifier/receiver is
adjusted using .