Filter
Top Products
6
USER
Optional SRC1 Basic Remote Control
POWER KEY – Turns the keypad on and off. Press and hold for All On or All
Off function.
NUMERIC KEYS – For direct selection of channels or tracks.
VOLUME UP/DOWN KEY – Raises and lowers the amp/receiver volume.
COMMAND KEYS – Control the source equipment.
DIRECT SOURCE SELECT KEYS – Directly select sources 1– 6 controlled by
the keypad.
F1 AND F2 KEYS – Set and select Favorite 1 and Favorite 2 presets.
CURSOR KEYS – Issue navigation commands for source equipment, allowing
movement through menus and program screens.
INPUT KEY – Scrolls through sources controlled by the keypad. Works the
same as the keypad’s Source key.
The optional SRC1 Basic System Remote Control will operate the K2 keypad
and sources 1–6 through the keypad. The SRC1 has no built-in programming
capability and therefore cannot operate source components directly.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8