Filter
Top Products
External Control
80 Runco LS-10i Installation/Operation Manual
PRE
L
IMINAR
Y
The last three commands show what happens when a control is grayed out. In this case,
the sharpness mode was set to advanced (value = 1) and then the simple sharpness slider
was attempted to be adjusted and queried. The response was “NA” or not available.
Table 6-2. Serial Commands
Operation Commands Values Notes
aspect = ?
0 = 16:9
1 = Letterbox
2 = 4:3
3 = VirtualWide
4 = Cinema
5 = VirtualCinema
memory = ?
0 = Custom 1
1 = Custom 2
2 = ISF Day
3 = ISF Night
4 = Default
? only returns a value if
ISF Day or ISF Night is
active, otherwise it returns
NA
save.mem =
0 = Custom 1
1 = Custom 2
save.isf =
0 = ISF Day
1 = ISF Night
bright
contrast
saturat
tint
sharp
nr
= ? + -
0 - 200
overscan = ?
0 = Off
1 = Crop
2 = Zoom
source.sel = ?
0 = HDMI 1
1 = HDMI 2
2 = RGB
3 = YPrPb 1
4 = YPrPb 2
5 = S-Video
6 = Video
7 = SCART
pip.select = ?
0 = Off
1 = HDMI 1
2 = HDMI 2
3 = RGB
4 = YPrPb 1
5 = YPrPb 2
6 = S-Video
7 = Video
8 = SCART
resync (execute)