Filter
Top Products
Specifications
90 Runco LS-10i Installation/Operation Manual
P
RELI
M
INARY
(2) HDMI with HDCP: HDTV RGB and Component, EDTV, SDTV, HDMI (High
Definition Multimedia Interface) with HDCP (High
Bandwidth Digital Content Protection), DVI via adapter
(not included)
(1) Component (3 x RCA, gold): HDTV, EDTV, SDTV
SCART RGBS via component and composite inputs
(adapter not included)
(1) Component
(3 x BNC, 75 ohm):
HDTV, EDTV, SDTV
(1) RGB (HD15): HDTV, RGBHV, YUV, EDTV
(1) S-Video (4-pin mini-DIN): SDTV
(1) Composite (RCA, gold): SDTV
(2) 3.5mm mini jack: 12V (+/-1.5V) screen trigger (250mA)
(1) 9 pin D-sub: RS-232 for discrete commands and software upgrades
Communication Parameters: 38400 bps, no parity, 8
data bits, 1 stop bit, no flow control
(1) 3.5mm mini jack: IR input for Niles/Xantech compatible IR repeater
systems
Communication Protocol: Conforms to NEC
standard IR protocol, 38-kHz carrier frequency, custom
code = 0x20DF
Menu Languages: English, French, Italian, German, Spanish, Swedish,
Portuguese, Russian
Communication and Control: HDMI Consumer Electronics Control (CEC) messages,
RS-232, IR remote, on-board keypad
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 400 Watts
(1365.2 BTUs/hour)
Operating Temperature: 50°F to 104°F (10°C to 40°C)
Operating Altitude: Sea Level - 10,000 feet (3,048m)
Operating Humidity: 0% to 85% non-condensing
Dimensions: 25.3" (643mm) L x 20.4" (519mm) W x 8.9" (225mm) H
(see Figure 7-1)
Table 7-1. LS-10i Specifications (continued)