Filter
Top Products
DELAYICH CTRL Selects the amount of Surround
Sound delay between the main and rear speakers.
Choose from 15, 20 or 30 milliseconds. Press once and
the current setting appears. Press again to change the
setting.
SURROUND Lets you selecta SurroundMode: Dolby
Pro LogicSurround, Dolby 3 Stereo or Hall. Pressonce
to turn on the surroundmode lastselected. Press
again to change
the mode.
SWAP AUDIO Swapsthe audio only from the large
picture to the smallpicture when you are watching TV
and using picture-in-picture (PIP),
_ SURROUND SOUND LEVEL CONTROL$_
+ Increasesthe volume in rear and center speakers.
- Decreasesthe volume in rear and center speaker.
BYPASS Turns on Bypassmode, which cancelsall
Surround sound modes.Sound is generated without
effects.
REAR.CTR LEVEL AdJusts the balance level of the
rear and center speakers. Pressonce for Center. Press
again for Rear.
RECEIVERFI'UNER CONTROLS >
CH + and CH - Tunesthe receiverto the next or
previous preset station stored in the receiver's
memory.
Lets you manually move up the AM/FM band.
INPUT.SEEK Selects auto tuning or manual tuning
mode.
MENU SELECT Stores the selected station in the
receiver's memory.
Number Buttons Let you enter numbers when
needed.
REV Lets you manually move down the AM/FM band.
_TV CONTROLS
+ On someRCATV models, usedto adjust menu
controls.
C
- On some RCATV models, used to adjust menu
controls.
ANTENNA Changes the antenna input.
CH + and CH - Tunes the TV channel up and down.
CLEAR Removes any menu from the screen.
DELAYICH CTRL In some RCA TV models, lets you
control the channel that appears in the PiP window or
the main screen in P(P mode.
GO BACK.DISC Returnsto the previous channel,
GUIDE.RDM Forsome models, brings up 12 small
pictures (previews of the next 12 channels in the
channel list). Pressagain to turn off channel guide.
INFO Displayschannel information.
INPUT.SEEK For someTV models,toggles through the
available input sources.
MENU SELECTFor some models, storeschannelsin the
TV's memory.
MOVE arrows In somemodels, when using PIP,moves
the small picture to another corner of the screen.Also,
used for menu navigation in some TV models.
Number Buttons Let you enter channel numbers and
time settings when needed.
PIP Turnson and off picture-in-picture on most RCA
TV modelswith PIP.
POWER Turnsthe TV off.
RESET.REP Returns picture quality controlsto their
original settings.
SKIP To change channels, press once. The TV will wait
30 secondsbefore returning to the original channel.
Pressrepeatedly to increasethe time.
SWAP PIP Swapsthe main picture in the PIPwindow.
13/ Turns on the TV and puts the remote in TV mode.
TV MENU Displaysthe TV'son-screen menus.
VCR CONTROLS >
CH + and CH - Tunesto the next or previouschannel
when watching TV through the VCR.
17