Filter
Top Products
CONNECTING A SATELLITE RECEIVER
Using a paired (red/white) stereo cable, a single
(yellow) video cable and two coaxial cables,connect
your new audio receiver to your satellite receiver as
shown to the right.
To watch TV programs in stereo after connection,
press TV and tune to the desired channel. To watch
satellite programming, press SAT,CABLEand tune to
the desired channel.
NOTE: Do not stackelectronic components or other
objects on top of the satellite receiver.The slotson
top of the receiver mustbe left uncovered to allow
proper airflow to the unit. Blockingthe airflow to the
unit could impair performance or damage your
receiver and other components. Also, do not stackthe
satellite receiver on top of a "hot component," suchas
an audio power amplifier.
AUDIO
RECEIVER
COMPLIMENTARY
COMPONENT _ (_=
TV
CONNECTING COMPLIMENTARY
COMPONENTS
Youcan connecta laserdiscplayer, secondVCRor
camcorder/videorecorder to the VIDEO connection.
Using a paired (red/white) stereo cable and two single
(yellow) video cables,connectyour new audio receiver
to the complimentary component as shown to the
right.
To play laserdiscsor videos, press the LDoVCR2and
then play.
NOTES:When using this connection for a second VCR,
the recording option is not available.
If your camcorder or video camera does not have an
RCA-type terminal for audio/video, you can purchase
an adapter from an RCA dealer or electronic parts
store.
If the video connection is being used when you try to
hook up your video recorder or camcorder, connect
the componentthrough any other available video
output.
lZ