Filter
Top Products
CONNECTING A COMPACT DISC
PLAYER
Using one paired (red/white) stereocable, connect
your new receiver to your compact discplayer as
shownto the right.
To play a CD, pressCD, put the receiver in CD mode
and pressPLAY.
NOTE: The AUDIO SOURCEconnectioncan be usedas
input for any stereo audio signal.
TAPE o_
DECK
CD
PLAYER
AUDIO
RECEIVER
AUDIO
CONNECTING A TAPE DECK
Usingtwo paired (redlwhite) stereo cables,connect
your new receiver to your tape deck asshown in the
diagram to the right.
To play a tape, pressTAPEand then PLAY.To record a
tape, turn on the audio sourceyou want to record
from and then press RECORDon the tape player.
CONNECTING A PASSIVE SUBWOOFER
Should you chooseto usea passivesubwoofer, the
hook up is slightlydifferent from that of a powered
one.
If necessary,remove the vinylcovering from the ends
of the wires and twist the wire. Pressdown and hold
the tab on the backof the speaker. Insertthe wire in
the hole, matching (+) to (+) and (-) to (-). Releasethe
tab and pull the wire gently to make sure it issecurely
connected
Speaker
AN Receiver
orTelevision
+R- +L-
I Subwoofer
Speaker
13