Filter
Top Products
TO STORE A STATION
1. Pressthe FM/AM button onthe receiver (or the
AM.FM button on the remote) to turn on the
receiver.
2,
3.
4.
Select the band--FM or AM.
Select the station you want to storein memory
using the methods describedabove.
Pressthe MENU-SELECTbutton on the remote.
"MEMORY" blinks in the display. While
"MEMORY" is blinking, press number buttons on
the remote for the station.
Forstations 1, 2 or 3 press O,then press1, 2, or 3.
Forstations 4 through 30, press the numbers
directly.
_fthe Memory indicator on the display turns off_
before you preset your station selection,press
J
MENU-SELECTagain.
If the receiver isdisconnected from itspower
source,the presetstationsare maintained in
memory for up to 7 days.
J
TO PLAY A PRESET STATION
Pressthe appropriate PresetStations number. For
stations 1, 2 or 3 press O,then press 1, 2, or 3. For
stations 4 through 30, press the numbers directly.
Or, press CH + on your remote to tune to the next
preset station or CH - to tune to the previous preset
station.
PRESET SCAN N ING
Usethe PRESETSCANbutton on the receiver's front
panel to review the preset stations stored in the
tuner's memory. "PRESET"and the station's location in
memory appear in the display. Thetuner automatically
scans all preset stations in order, pausing at each one
for approximately 5 seconds.
When the tuner reaches the station you want, press
PRESETSCANto stop the scanning. If the scan is not
interrupted, the tuner reviews all preset stations in
order, stopping at the point where the scan began.
USING SWAP AUDIO
Swap audio lets you changethe sound from the large
picture to the small picture when you are watching TV
and using picture-in-picture (PIP)with an external
video source.
TO USE SWAP AUDIO
When you are watching TV and turn on PIP,you can
turn on another video source and swap the sound from
the large picture coming from the TV to the small
picture coming from the other video source.
1. PressTV on the remote to turn on the TV and put
the receiver in TV mode.
2. Pressthe PIPbutton. The empty PIPappears on the
screen.
3. Activate a video source for the PIRThe picture
from the video source appears in the PIP.
4. PressTV.
S. Change to the TV channel you want to watch on
the
large screen.
6. PressSWAPAUDIO to swap the sound between the
large picture and the small picture.
7. To swap the video between the large picture and
the small picture, usethe SWAPPIPbutton on the
remote.
If you swap the TV picture to the PIPand the other
video source to the large picture, you may not be
able to swap
the audio.
TO CHANGE THE VIDEO SOURCE AND
SWAP THE AUDIO
Ifyouwant to changethevideosourcefor the PIPandwant to
beableto useSWAPAUDt_
1. Turn off PIP.
2. Change the video sourceto another video
component connected to the receiver.
3. PressTV to watch the "IV.
4. PressPIP.The video source appears inthe PIP.The
video from the TV appears in the large picture.
5. PressSWAPAUDIO to swap the audio as you want.
I The Swap Audio feature may not work with all TV /
brands with the PIPfeature.
J
If your TV has a PIPfeature, seethe TV's user's guide
for instructions for using it.
10