15
DVD PLAYER OPERATION
MP3 AND PICTURE CD PLAYBACK
The player plays MP3 and Picture CDs on CD-R/CD-RW discs.
PLAYING AN MP3 DISC
1. Press OPEN/CLOSE
Ï
to open the disc tray.
2. Insert an MP3 disc in the tray with the label side up.
3. Press
OPEN/CLOSE
Ï
to close the disc tray. The player loads
the disc and playback starts automatically.
4. To pause playback, press
PAUSE. To resume playback, press
PLAY.
5. Press the number keys to select the desired file. For example, to
enter 56, press
+10 five times, then press 6.
6. While playing, to skip to the next, or previous, file:
•press
NEXT (or F.FWD on the player) to skip to the
beginning of the next file.
• press the
PREV to skip to the beginning of the previous
file.
•press
GOTO to select the desired track number, then press
ENTER.
7. To stop, press
STOP.
Notes:
• You cannot fast forward or reverse during MP3 playback.
• During MP3 playback, if you press
STOP and then press
PLAY, the player plays from the beginning of the file you
stopped.
REPEATING A FILE OR THE ENTIRE DISC
To replay a single file, press REPEAT DISC. Rep 1 appears on-screen.
To replay the entire disc, press
REPEAT DISC again. Rep All appears
and the player replays all the files.
To cancel the repeat function, press
REPEAT DISC until Rep Off
appears.
MP3 ON-SCREEN DISPLAY
1. Turn on your TV to view the on-screen MP3 file display.
2. Press
MENU to view the folder directory.
3. Press
, , , or to select the desired folder and press
ENTER.
4. Press
, , , or to select the desired file and press
ENTER. The selected file plays.
Note: The player's ability to read MP3 discs depends on the
following:
• The bit rate must be between 64 – 256 kbps.
• The total number of files on the disc should not exceed 254.
• The maximum number of directories should not exceed 32.
• The maximum depth level of directories should not exceed 4.
• Use only letters and/or numbers in file names. If you use special
characters, the file and/or folder names may not appear correctly.
• File names should be named using eight or fewer characters and
must incorporate the .MP3 file extension. If there are any other
file types on the disc, the player will not play the MP3 disc.
• When recording on CD-R discs, use 74-minute (650Mb) discs.
• CD-R/CD-RW discs should be finalized by single session format.
See your CD/MP3 creation software for details.
PLAYING A PICTURE CD
1. Press OPEN/CLOSE
Ï
to open the disc tray.
2. Place a picture CD in the tray with the label side up.
3. Press
OPEN/CLOSE
Ï
to close the disc tray. The player takes a
few moments to load the disc.
4. The unit automatically cycles through all the pictures and then
returns to the thumbnail image view.
Notes:
•Press
MENU or STOP to view thumbnail images.
•Press
NEXT or PREV to scroll and view all images in the
thumbnail view. To view one image full-screen, use
, , ,
or
to highlight the image. Then press ENTER. The selected
image appears full-screen.
• The player only reads files with the .JPG extension.
•Press
PLAY to view one image. Press PLAY again to
automatically view the images as a slide show. The images
appear one by one for a few seconds each.
•Press
PAUSE to interrupt playback. Press PLAY to resume
playback.
•Press
ANGLE to rotate the picture orientation by 90°.
•Press
AUDIO to change the picture presentation transition
setting. (This changes the way the picture views fade in and
out.) Select from
TRANS 1, TRANS 2, TRANS 3, TRANS 4,
TRANS 5, or TRANS 6.
31-5025.fm Page 15 Wednesday, January 15, 2003 5:05 PM
