Playing sources
05
42
En
Using Midnight and Loudness
listening
The Midnight listening feature allows you to
hear effective surround sound of movies at
low volume levels. The effect automatically
adjusts according to the volume at which
you’re listening.
The Loudness listening feature can be used to
get good bass and treble from music sources
at low volume levels.
• Press MIDNIGHT/LOUDNESS.
Each press cycles through the effects as
follows:
• You can’t use MIDNIGHT/LOUDNESS
when DVD 5.1 ch/DVD 7.1 ch has been
selected, or when listening to a DTS
96kHz/24 bit source.
Using the tone controls
Depending on what you are listening to, you
may want to adjust the bass or treble using
the front panel tone control.
1 Press TONE to select the frequency you
want to adjust.
Each press switches between BASS and
TREBLE.
2 Use the MULTI JOG dial to change the
amount of bass or treble as necessary.
Wait about five seconds for your changes to
be input automatically.
• You can only use the tone controls when
STEREO/DIRECT is selected. DIRECT will
switch to STEREO when the tone controls
are used.
• The tone controls affect SPEAKER A only.
They can’t be used when SPEAKER A is
switched off.
Playing other sources
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
3 Select the source you want to play-
back.
Use the MULTI CONTROL buttons (or INPUT
SELECT).
Off
MIDNIGHT
LOUDNESS
DOWN UP
MULTI JOG
MASTER VOLUME
ENTER
SPEAKERS
S-VIDEO VIDEO L AUDIO R
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
QUICK
SETUP
VIDEO INPUT
MULTI JOG
MULTI CONTROL
RECEIVER
DVD/LD
TV/SAT
INPUT SELECT
CD
VCR/DVR TV CONT
TUNER
CD-R/TAPE