Pioneer VSX-AX5Ai-G Stereo Receiver User Manual


 
Advanced setup
11
86
En
The Expert setup menu
The settings in the Expert setup menu are more
advanced features of this receiver that you can use to
make detailed adjustments when you’re more familiar
with the system. Before making these settings, you
should have already completed
Automatically setting up
for surround sound
on page 12.
You only need to make these settings once (unless you
change the placement of your current speaker system or
add new speakers).
1 Make sure your receiver and TV are both
switched on.
2 Using the remote control, press RECEIVER, then
press the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/
(cursor up/down) buttons and
ENTER
on the remote
control to navigate through the screens and select menu
items.
Tip
You can also use the front panel display to make
settings. You can also use the
MULTI JOG
dial and
ENTER
on the front panel instead of the
/
(cursor
up/down) buttons and
ENTER
on the remote control.
3 Select ‘Surround Setup’ then press ENTER.
4 Select ‘Expert’ then press ENTER.
5 Select the setting you want to adjust.
Crossover Network
– Specify which frequencies will
be sent to the subwoofer (see
Crossover Network
below).
Fine Channel Level
– Make fine adjustments to the
overall balance of your speaker system (see
Fine
Channel Level
below).
Fine Channel Delay
– Make precise delay settings for
your speaker system (see
Fine Channel Delay
on
page 88).
Acoustic Cal EQ
– Measure the acoustic
characteristics of your room and make detailed
adjustments to the frequency balance of your
speaker system (see
Acoustic Calibration EQ
on
page 88 and
Professional Acoustic Calibration
on
page 91).
Bass Peak Level
– Prevent bass tones from distorting
the sound from your speakers (see
Bass Peak Level
on
page 93).
D-Range Control
– Specify the amount of dynamic
range adjustment to Dolby Digital and DTS movie
soundtracks (see
Dynamic Range Control
on
page 94).
6 Make the adjustments necessary for each
setting, pressing ENTER to confirm after each
setting.
When you’re finished, you can select
Exit
, then press
ENTER
to go back to the System Setup menu.
SYSTEM SETUP
ENTER
RECEIVER
RECEIVER
System Setup
[ 1. Surround Setup ]
[ 2. THX CINEMA Setup ]
[ 3. Input Assign ]
[ 4. Function Rename ]
[ 5. SACD Setup ]
[ 6. PHONO/LINE Setup ]
[ 7. Multi Room ]
[ 8. 12V Trigger ]
[ Exit     ]
1.Surround Setup
[ SurrBack System ]
[ Auto Setting ]
[ Normal ]
[ Expert ]
[ Exit ]
1.Surround Setup
[ SurrBack System ]
[ Auto Setting ]
[ Normal ]
[ Expert ]
[ Exit
]
Expert
[ Crossover Network ]
[ Fine Channel Level ]
[ Fine Channel Delay ]
[ Acoustic Cal EQ ]
[ Bass Peak Level ]
[ D-Range Control ]
[ Exit ]
VSX-AX5Ai.book 86 ページ 2004年6月2日 水曜日 午後3時27分