Filter
Top Products
Controlling other equipment
08
64
En
4 Use
/
(cursor up/down) to select a command
in the sequence then press ENTER.
If this is the first command in the sequence, select
1st
Cmmnd
. Otherwise, simply choose the next command in
the sequence.
5 To add (or change) a command select ‘Change’
and press ENTER.
Function
flashes in the display.
• To erase a command select
Clear
and press
ENTER
.
You will return to the last step.
• To go back a step, select
*Exit*
and press
ENTER
.
6 Press the MULTI CONTROL button for the
component whose command you want to input.
Key
flashes in the display.
7 Select the button for the command you want to
input.
The following remote control commands can be
selected:
• After selecting a command,
COMPLETE
appears in
the display.
8 Repeat steps 4–7 to program a sequence of up to
five commands.
• You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components
, you don’t need to:
• program the power to switch off in a shutdown
sequence;
• program the power to switch on if it’s the source
component selected in step 3;
• program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
9 When you’re finished, use
/
(cursor up/down)
to select ‘*Exit*’ from the menu and press ENTER.
You will return to the
REMOTE SETUP
menu. Select
*Exit*
again to exit.
Using multi operations
You can start multi operations with the receiver switched
on, or in standby.
1 Press MULTI OPERATION.
Select Function
flashes in the display.
2 Press a function button that has been set up with
a multi operation.
The receiver switches on (if it was in standby) and the
programmed multi operation is performed automatically.
SOURCE
DIMMER
LOU DNESS TONE
SIGNAL SEL
DNR
DISC
1
5
90
678
342
BASS/TREBLE
VIDEO SEL
HI-BIT
DIRECT ACCESS
SEARCH MODE
ENTER
GUIDE
SYSTEM SETUP
TUNER EDIT
MPX
TUNING BAND
DISP MODE
TUNING
STATION
STATION
CHANNEL
SUB TITLE
ENTER
TOP MENU
MENU
AUDIO
RETURN
TRACK
EXIT
+
10
+
+
+
CHANNEL
+
EFFECT/CH SEL
TV
TV VOL
TV CONTROL
TV CH
TV INPUT
MIDNIGHT
MULTI DH
INPUT
SB CH
MODE
STEREO/
DIRECT
+
+
TEXT ON RF ATT
TEXT OFF CLASS
DVD/LD
VCR2 VIDEO CD
TV/SAT
TV CONT
MULTI CONTROL
VCR1 /
DVR
CD-R/
TAPE1
MD/
TAPE2
MULTI
OPERATION
TUNER
VSX-AX5Ai.book 64 ページ ２００４年６月２日 水曜日 午後３時２７分