Filter
Top Products
Controls and displays
04
35
En
Display
Note that the illustration below shows the European model display.
1 SIGNAL indicators
(page 43)
Light to indicate the currently selected input signal.
AUTO
lights when the receiver is set to select the input
signal automatically.
2 Digital format indicators
•
PRO LOGIC II
– Lights during Dolby Pro Logic II and
Pro Logic IIx processing.
•
Neo:6
– Lights during Neo:6 processing with 2-
channel sources.
•
2
DIGITAL
– Lights when a Dolby Digital signal is
detected.
•
DTS
– Lights when a DTS signal is detected.
•
ES
– Lights when a DTS-ES signal is detected.
•
EX
– Lights when a Dolby Digital EX signal is
detected.
•
STEREO
– Lights during 2-channel playback.
3 LOUDNESS
(page 46)
Lights when Loudness listening is active.
4 MIDNIGHT
(page 46)
Lights when Midnight listening is active.
5 TONE
(page 46)
Lights when the tone control is switched on.
6 DNR
(page 47)
Lights when digital noise reduction is switched on.
7 Tuner indicators
STEREO
(page 48)
Lights when listening to a stereo FM broadcast in
auto/stereo mode.
MONO
(page 49)
Lights when the tuner MPX mode is set to mono.
TUNED
Lights when tuned to a broadcast.
European model only:
RDS
(page 51)
Lights when an RDS broadcast is received.
EON
(page 52)
EON
lights when the EON mode is set, and flashes
during reception of an EON broadcast. The
indicator lights when the current station carries the
EON service.
8 SB CH
(page 44)
Indicates the surround back channel (or Virtual Surround
Back) setting (
AUTO
,
ON
or
OFF
).
9 Program format indicators
These change according to which channels are active in
Dolby, DTS, DVD-A and SACD sources.
LS
,
S
and
RS
will light at the same time to indicate 6.1
channel sources.
•
L
– Left front channel
•
C
– Center channel
•
R
– Right front channel
•
LS
– Left surround channel
•
S
– Surround channel (mono) or surround back
channel
•
RS
– Right surround channel
•
LFE
– Low frequency effects channel
• – Lights when an LFE signal is detected
10 Speaker indicators
(page 71)
Lights to indicate the current speaker system,
A
and/or
B
.
11 Listening mode indicators
(page 38)
Shows
MOVIE
or
MUSIC
when a surround listening
mode is selected.
DSP
will light with a box around it when
one of the advanced (DSP) listening modes is selected.
12 Hi-BIT/SAMPLING
(page 45)
Lights when the audio scaler is switched on.
13 MULTI-ROOM
(page 73)
Lights when the multi room feature is active.
14 Volume level indicator
1235
8
476
91110 12 13 14
VSX-AX5Ai.book 35 ページ ２００４年６月２日 水曜日 午後３時２７分