Pioneer PDK-1014 Stereo Receiver User Manual


 
Additional information
12
83
En
Specifications
Amplifier section
Continuous Power Output (Stereo)
Front. . . . . . . . . 150 W + 150 W (DIN 1kHz, THD 1%, 6
)
120 W + 120 W (DIN 1kHz, THD 1%, 8
)
Continuous Power Output (Multichannel)
Front. . . . . . . . . 120 W + 120 W (DIN 1kHz, THD 1%, 8
)
Center . . . . . . . . . . . . . . . 120 W (DIN 1kHz, THD 1%, 8
)
Surround . . . . . 120 W + 120 W (DIN 1kHz, THD 1%, 8
)
Surround back 120 W + 120 W (DIN 1kHz, THD 1%, 8
)
Rated Power Output (Stereo). . . . . . . . . . . . . . 140W+140W
(20Hz–20kHz, 0.09%, 6
)
Rated Power Output. . . . . . . . . . . . . . . . . . . . . 110W+110W
(20Hz–20kHz, 0.09%, 8
)
The above specifications are applicable when the
power supply is 230V.
Audio Section
Input (Sensitivity/Impedance)
LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/47 k
Frequency Response
LINE. . . . . . . . . . . . . . . . . . . . . .5 Hz to 100,000 Hz dB
Output (Level/Impedance)
REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/2.2 k
Tone Control
BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz)
TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz)
LOUDNESS. . . . . . . . . . . . . . +4/+2 dB (100Hz/10 kHz)
(at volume position –40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 dB
Signal-to-Noise Ratio
[DIN (continuous rated power output/50mW]
LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92/65 dB
Composite Video / S-Video Section
Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75
Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB
Frequency Response . . . . . . . . . . . . . 5 Hz to 10 MHz dB
Component Video Section
Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75
Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB
Frequency Response . . . . . . . . . . . . . 5 Hz to 40 MHz dB
FM Tuner Section
Frequency Range . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz
Usable Sensitivity . . . . . . Mono: 15.2 dBf, IHF (1.6 µV/75
)
50 dB Quieting Sensitivity . . . . . . . . . . . . . . Mono: 20.2 dBf
Stereo: 41.2 dBf
Sensitivity (DIN) . . . . . . . . . . . . . . Mono: 1.1 µV (S/N 26dB)
Stereo: 50 µV (S/N 46dB)
Signal-to-Noise Ratio . . . . . . . . . . . Mono: 76 dB (at 85 dBf)
Stereo: 72 dB (at 85 dBf)
Signal-to-Noise Ratio (DIN). . . . . . . . . . . . . . . . Mono: 62 dB
Stereo: 58 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . .Stereo: 0.6% (1 kHz)
Alternate Channel Selectivity . . . . . . . . . . .70 dB (400 kHz)
Stereo Separation . . . . . . . . . . . . . . . . . . . . . . .40 dB (1 kHz)
Frequency Response . . . . . . . . . . . .30 Hz to 15 kHz ± 1dB
Antenna Input . . . . . . . . . . . . . . . . . . . . . . 75
unbalanced
AM Tuner Section
Frequency Range . . . . . .531 kHz to 1,602 kHz (9 kHz step)
Sensitivity (IHF, Loop antenna) . . . . . . . . . . . . . . . 350 µV/m
Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna
Miscellaneous
Power Requirements. . . . . . . . . . . . AC 220–230 V, 50/60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . .430 W
In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.52 W
AC Outlet . . . . . . . . . . . . . . . . . . . . . (switched) 100 W MAX.
Dimensions . . . . . . . . . . . . 420 (W) x 173 (H) x 465 (D) mm
Weight (without package)
VSX-2014i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.6 kg
VSX-1014. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.4 kg
Furnished Parts
Microphone (for Auto MCACC setup). . . . . . . . . . . . . . 1
Microphone stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/LR6 dry cell batteries
. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cord (VSX-2014i only). . . . . . . . . . . . . . . . . . . . . . . . . 1
These operating instructions
Note
Specifications and the design are subject to possible
modifications without notice, due to improvements.
Cleaning the unit
Use a polishing cloth or dry cloth to wipe off dust and
dirt.
When the surface is dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six
times with water, and wrung out well, and then wipe
again with a dry cloth. Do not use furniture wax or
cleansers.
Never use thinners, benzine, insecticide sprays or
other chemicals on or near this unit, since these will
corrode the surface.
VSX_2014TX.book.fm Page 83 Wednesday, June 2, 2004 5:21 PM