Filter
Top Products
88
Advanced Setup
Assigning the Digital Inputs
If you did not hook up your digital equipment in accordance with the default settings for the digital inputs
(see p.17, 19 & 22-23) you need to complete the procedure below. You have to do this in order to tell the
receiver what digital equipment is hooked up to which terminal so the buttons on the remote correspond
to what you have hooked up.
1
Turn on the receiver and your TV,
press the RECEIVER on the remote
control.
2
Press the SYSTEM SETUP button.
3
Looking at the on-screen display on
your TV, use the 5∞ buttons to
select INPUT ASSIGN. Press the
ENTER button.
4
DIGITAL-IN SELECT should be
selected, if not use the 5∞ buttons
to select it. Press the ENTER button.
5
Use the 5∞ buttons to move
through the different digital input
settings and use the 2 3 buttons to
select the component that you
hooked up to that digital in.
6
If you're not sure which component
is connected to which digital in, look
on the back of the receiver and
check the cables you connected.
7
When you're finished use the 5∞
buttons to select RETURN and press
ENTER.
This exits the "Assigning the Digital Inputs" mode.
8
Use the 5∞ buttons to select
RETURN and press ENTER, again.
Then, use the 5∞ buttons to select
EXIT and press ENTER.
3
4
6
System Setup
[ Auto Surround Setup ]
[1. Input Assign ]
[2. Surround Setup]
[3. Expert Setup]
[4. THX Audio Setup]
[Exit]
1.Input Assign
[ 1.Digital-In Select ]
[ 2.C' nent Vudeo In ]
[Return]
memo
• The possible digital inputs that can be assigned
are: DVD/LD, TV, SAT, VCR 1/DVR, VCR 2, CD,
CD-R/TAPE 1 (except for a 2 RF input which
doesn't include CD, CD-R/TAPE 1).
• If you assign a digital input to a certain function
(for example DVD/LD) then any digital inputs pre-
viously assigned to that function will automati-
cally be set to OFF. This is because one func-
tion cannot be assigned to two different places
(except for RF IN).
1.1. Digital-In Select
Digital-1 [DVD/LD]
Digital-2 [ CD ]
Digital-3 [ SAT ]
Digital-4 [ VCR1 ]
Digital-5 [ CD-R ]
RF IN [DVD/LD]
[Return]
MULTI CONTROL
DVD/LD
TV SAT
TV CONT
VCR1/
DVR
VCR2 VIDEO
MULTI
OPERATION
CD
DIMMER
CD-R/
TAPE1
TUNER
RECEIVER
1
INPUT ATT
2
LOUDNESS
3
SPEAKER A/B
4
VIDEO SEL
5
SIGNAL SEL
6
TAPE 2
DIRECT ACCESS DISP MODE
–+
+
10 DISC
ENTER
7
EFFECT/CH SELL
8
TONE
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT
MENU
REMOTE SETUP
STATUS
MPX
GUIDE
EXIT
RETURN
ENTER
¶
TUNING
–
STAT ON
–
1
DTV ON/OFF
TUNING
+
+
¡
STAT ON
8
3
EXTRA MENU
BAND
DTV MENU CLASS
1
2
3~8