Filter
Top Products
42
Check the Auto Settings
1
If you want to check what settings have been input for your surround sound parameters you can do it following
the steps below.
1
Use the 5∞ buttons to select CHECK
and press ENTER.
2
The first menu in which you can check
your settings will appear. This is the
speaker settings.
You can navigate this menu with the 2 3 buttons but
we recommend you follow the steps below.
The order of the settings menus is: Speakers; Channel
Delay; Channel Level; Acoustic Calibration.
3
To check the next settings select NEXT
with the 5∞ buttons and press ENTER.
If you want to leave the settings check select RETURN
with the 5∞ buttons and press ENTER and go to step 6.
4
Continue to move through the menus
using the 5∞ buttons to select NEXT
and pressing ENTER until you are done
checking the settings.
5
To exit the check select RETURN with
the 5∞ buttons and press ENTER .
You will return to the SURROUND SETUP menu.
6 To exit the SURROUND SETUP menu
select RETURN with the 5∞ buttons
and press ENTER. Then select EXIT
with the 5∞ buttons and press ENTER.
3.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal ]
[Return]
Setting Up for Surround Sound
OFF
S0URCE TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD
TV SAT
TV CONT
VCR1/
DVR
VCR2 VIDEO
MULTI
OPERATION
CD
DIMMER
CD-R/
TAPE1
TUNER
RECEIVER
1
INPUT ATT
2
LOUDNESS
3
SPEAKER A/B
4
VIDEO SEL
5
SIGNAL SEL
6
TAPE 2
DIRECT ACCESS DISP MODE
– +
+
10 DISC
ENTER
7
EFFECT/CH SELL
8
TONE
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT
MENU
REMOTE SETUP
STATUS
MPX
GUIDE
EXIT
RETURN
ENTER
¶
TUNING
–
STATION
–
CHANNEL
–
1
4
DTV ON/OFF
TUNING
+
+
CHANNEL
+
¡
STATION
¢
8
3
7
EXTRA MENU
BAND
DTV MENU CLASS
SETUP
1~6