Filter
Top Products
35
SURROUND SET UP
To ensure the best possible surround sound, complete the following setup operations. Some of these are the
same (and take precedence over) the settings you made in the Quick Start Guide, so consider if the ones you
made at that time were adequate. If you feel they were, move on to the next setting here. You only need to
make these settings once (unless you change the placement of your current speaker system or add new
speakers, etc.). These setup operations use on-screen displays (OSDs) on your TV to display the settings and
choices so be sure your TV and receiver are properly hooked up and that your TV is set to this receiver. You
need to connect the remote control, with its built in mic, to the front panel of the receiver so that it can measure
the sound and ensure the proper settings. For more information on the remote control hookup see page 13.
1
Turn on the receiver and your TV, press
the RECEIVER button on the remote
control.
Make sure your TV is connected and set to the receiver.
2
Press the SYSTEM SETUP button.
The menu possibilities appear on your TV.
3
Use the 5∞ and buttons to select
SURROUND SETUP. Press ENTER.
4
Follow the order below to set up your
speakers for better sound. Use the 5∞
and 2 3 buttons to navigate through
the menus. When you have the setting
you want in a particular menu, press
ENTER.
In each mode, the current settings are displayed. We
suggest you adjust all these settings when you first hook
up the receiver. That gets them out of the way and you
won't need to return to this setting mode unless you
change your home set up by adding new speakers (etc.).
SPEAKER SYSTEMS (See p.36-37)
Use to specify the type and number of speakers you
connected.
CHANNEL DELAY (See p.38)
You must add distance settings to all your speakers for the
most realistic surround sound. Adding a slight delay to
some speakers enhances sound separation and is particu-
larly important for achieving a surround sound effect. You
need to figure out the distance from your listening position
to your speakers to add the proper delay.
CHANNEL LEVEL (See p.39-40)
Use to balance the volumes of your different speakers.
ACOUSTIC CALIBRATION (See p.41)
This setting is a kind of room equalizer for your speakers.
3
Setting Up for Surround Sound
OFF
S0URCE TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD
TV SAT
TV CONT
VCR1/
DVR
VCR2 VIDEO
MULTI
OPERATION
CD
DIMMER
CD-R/
TAPE1
TUNER
RECEIVER
1
INPUT ATT
2
LOUDNESS
3
SPEAKER A/B
4
VIDEO SEL
5
SIGNAL SEL
6
TAPE 2
DIRECT ACCESS DISP MODE
–+
+
10 DISC
ENTER
7
EFFECT/CH SELL
8
TONE
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT
MENU
REMOTE SETUP
STATUS
MPX
GUIDE
EXIT
RETURN
ENTER
¶
TUNING
–
STATION
–
CHANNEL
–
1
4
DTV ON/OFF
TUNING
+
+
CHANNEL
+
¡
STATION
¢
8
3
7
EXTRA MENU
BAND
DTV MENU CLASS
SETUP
1
2
3~4
System Setup
[Auto Surround Setup]
[1. Input Assign ]
[2. Surround Setup ]
[3. Expert Setup ]
[4. THX Audio Setup ]
[Exit]