Filter
Top Products
39
SURROUND SET UP
1
CHANNEL LEVEL should be selected. If
it isn’t use the 5∞ buttons to select
and press ENTER.
2
Use the 5∞ buttons to select a channel
level setting mode, then press ENTER.
Test tones will be output.
There are three ways to set the CHANNEL LEVEL:
MANUAL; SEMI AUTO; AUTO.
MANUAL : For this setting method you move the test
tone manually and adjust the channel level.
SEMI AUTO : In this setting the test tone moves by
itself and you set the levels.
AUTO : This way of setting the levels is like that
described in the Quick Start Guide (p.13). The levels are
set automatically by the receiver as it outputs the test
tones. For this setup you must have the mic on the
remote control connected (see page 13).
WARNING : Be prepared! The test tones are output at
a high volume level.
MASTER VOLUME rotates to the reference position (0 dB)
and the display on the receiver flashes TEST TONE. After a
few seconds the test tone is output.
• If your subwoofer has a volume control, set it to the
middle position before doing these operations.
CHANNEL LEVEL (channel balance)
The following steps show you how to balance the sound output level of your speakers. Proper speaker balance
is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If
starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.35) first. If you’re not sure of the best
setting for your system, we recommend setting the CHANNEL LEVEL to AUTO.
Setting Up for Surround Sound
VIDEO SEL
5
SIGNAL SEL
6
TAPE 2
DIRECT ACCESS DISP MODE
– +
+
10 DISC
ENTER
7
EFFECT/CH SELL
8
TONE
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT
MENU
REMOTE SETUP
STATUS
MPX
GUIDE
EXIT
RETURN
ENTER
¶
TUNING
–
STATION
–
CHANNEL
–
1
4
DTV ON/OFF
TUNING
+
+
CHANNEL
+
¡
STATION
¢
8
3
7
EXTRA MENU
BAND
DTV MENU CLASS
1~4
3.3. Channel Level
[Manual]
[Semi Auto]
[Auto]
Normal Surround
[Return]
Your Speaker Systems
” Normal Surround ”
2
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal EQ ]
[Return]
memo
1