Filter
Top Products
Repeat Mode Status
When the REPEAT button is pressed on the remote control, the player displays three
repeat options for LaserDiscs: Repeat Side, Repeat Chapter or Auto Return. Repeat
options for CDs are Repeat Side, Repeat Track and Auto Return. All of the repeat
options may be toggled through by pressing the REPEAT button several times.
Repeat Mode Status is displayed in Area 2, the upper right corner of the monitor.
• When Repeat Side is selected, the player will play through the video material* to
the end on a CAV or CLV LaserDisc, or through the audio material on a CD, and
then the player will search to the beginning of the disc and play it again.
• Repeat Chapter is selected during CAV or CLV LaserDisc playback of a
particular chapter. The player will play through the end of the chapter*, when
it reaches the chapter’s end, it will search to the beginning of the chapter and play
it again. When Repeat Chapter or Repeat Track is selected, the player will
repeat the selected chapter or track continuously until a Search command is
sent to the player or until the Repeat Mode is changed. Powering off the player
or sending an RS 232C command puts the player back into Repeat Side mode.
• Repeat Track is selected during CD playback of a particular track. The player
will play through the end of the track and when it reaches the track’s end, it will
search to the beginning of the track and play it again.
• When Auto Return is selected, the player will play through the video
material* to the end of a CAV or CLV LaserDisc or through the audio material
on a CD. When it reaches the end, the player will spin down the disc and enter
Park Mode.
* If a picture stop is encountered during playback of a CAV disc, the player will
stop and hold a still frame at that location until it receives the next motion command.
Picture stops are often encoded on the first frame of a chapter but they also may
be encoded at other locations. Picture stops cannot be encoded on CLV discs.
Repeat Side and Repeat Chapter do not override picture stops.
Chapter Two • CLD-V2600 / 2400 Level I & III
2-18 TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual
Figure 2-Y
Repeat
Side
The Repeat Mode status is displayed in Area 2,
the upper right corner of the monitor. The
CLV display, described on the next page, is
also displayed in Area 2.
The Repeat button functions only during
playback. Default at Power-On is Repeat Side.