Filter
Top Products
4)
Timing
The timing from the receipt of a command to the return of the status value is
as follows:
• T1 is the time from the receipt of <C/R> at the end of the command string to
the start of command execution, and is within a maximum of 20 ms.
• T2 is the command execution time, and is at least 14 ms.
T2 (before the <C/R>) increases depending on the type of command.
• The minimum processing time for any command (total of T1 and T2) is 14 ms.
Chapter Four • CLD-V2600 / 2400 Level I & III
Figure 4-G
Timing Diagram
TxD
<CR>
<CR>
R
T1
T2
Execution
4-10 TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual
T1 ≤ 20 ms
T2 ≤ 14 ms