Filter
Top Products
Hands-free phoning with
cellular phones featuring
Bluetooth wireless technology
9
8
7
6
4
3
2
1
5
If you use Bluetooth adapter (e.g. CD-BTB100),
you can connect a cellular phone featuring
Bluetooth wireless technology to this unit for
hands-free, wireless calls, even while driving.
For details concerning operation, refer to the
Bluetooth adapter’s operation manual. This
section provides brief information on the
hands-free phoning operations with this unit
which slightly differes or is cut short from that
described in the Bluetooth adapter’ s operation
manual.
Important
Since this unit is on standby to connect with your
cellular phones via Bluetooth wireless technol-
ogy, using this unit without running the engine
can result in battery drainage.
1 Source name
Shows the selected source name.
2 Source icon
Shows which source has been selected.
3 Phone number
Shows the phone number you selected.
4 User number indicator
Shows the registration number of the cellu-
lar phone.
5 Device name
Shows the device name of the cellular
phone.
6 Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
! Incoming call notice is not displayed for
calls made when your cellular phone is
disconnected from this unit.
7 Automatic answering/Automatic reject-
ing indicator
Shows when the automatic answering func-
tion is on (for more details, refer to Setting
the automatic answering on page 82).
Shows when the automatic rejecting func-
tion is on (for more details, refer to Setting
the automatic rejecting on page 82).
8 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
! If the battery strength is not available,
nothing is displayed in the battery
strength indicator area.
9 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
! Depending on the cellular phones featur-
ing Bluetooth wireless technology, radio
field intensity is not available. In this
case, the signal level indicator does not
appear.
% Touch the source icon and then touch
TEL to select the telephone.
Bluetooth Telephone
En
74
Section
18