Pioneer AVH-P6800DVD Stereo Receiver User Manual


 
# When a subwoofer is connected to the rear
output, set for subwoofer SUB. W.
# When the rear output setting is SUB. W, you
cannot change the subwoofer controller.
3 Touch c or d on the PREOUT setting to
switch the subwoofer output or non fading
output.
Touch c to select subwoofer output and
SUB.W appears in the display. Touch d to se-
lect non fading output and FULL appears in
the display.
Notes
! Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to Using nonfading output on page 86)
or subwoofer output (refer to Using subwoofer
output on page 86) in the audio menu on.
! If you change the subwoofer controller, sub-
woofer output and nonfading output in the
audio menu return to the factory settings.
Switching the sound
muting/attenuation
Sound from this system is muted, attenuated
or mixed automatically in the following cases:
! When a call is made or received using a
cellular telephone connected to this unit.
! When the voice guidance is output from a
Pioneer navigation unit connected to this
unit.
% Touch TEL/GUIDE on the initial menu to
select any of the muting, attenuation or
off.
Touch TEL/GUIDE until the desired setting ap-
pears in the display.
! MUTE Muting
! ATT-20dB Attenuation (ATT-20dB has a
stronger effect than ATT-10dB)
! ATT-10dB Attenuation
! OFF Turn the sound muting/attenuation
off
Notes
! The sound is muted or attenuated, MUTE or
ATT are displayed and no audio adjustment is
possible.
! Operation returns to normal when the phone
connection or the voice guidance is ended.
Mixing navigation voice/AVG-
VDP1 beep and audio sound
Mixing navigation voice/beep
and audio sound
When there is a navigation guidance, you can
mix the guidance voice/beep sound from a
Pioneer navigation unit with the audio sound
from this system. You can select either mixing
both the guidance voice and the beep sound
or the guidance voice only.
! You can operate this function only when a
Pioneer navigation unit is connected to this
unit.
! When the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you
cannot use this function.
! We recommend that you select GUIDE to
ensure quality sound.
% Touch NAVI MIX on the initial menu to
switch the mixing of navigation voice/
beep.
Touching NAVI MIX will switch the mixing of
navigation between ALL (mixing both gui-
dance voice and beep) and GUIDE (mixing
guidance voice only).
Initial Setup
En
108
Section
23