Filter
Top Products
! Only when Bluetooth adapter (e.g. CD-
BTB100) is connected to this unit, you can
operate this function.
1 Touch PIN code input on the initial
menu.
PIN code input display appears.
2 Touch 0—9 to input the PIN code of
your Bluetooth audio player.
# Touch C to delete the number.
3 After inputting PIN code (up to 16 di-
gits), touch ENTER.
The PIN code you entered is stored in this
unit.
Extending the vehicle’s
antenna
At the standard setting, the antenna of your
vehicle is automatically retracted when you se-
lect the source OFF or when the ignition
switch is at ACC. At this setting, the source re-
mains OFF even when you receive an incom-
ing call through Bluetooth adapter (e.g. CD-
BTB100). If you want to take the incoming
calls you receive on the OFF source, turn
AUTO ANT MODE off. The OFF source will be
switched to Telephone and the antenna of
your vehicle will be extended when this unit re-
ceives an incoming call.
! Only when Bluetooth adapter (e.g. CD-
BTB100) is connected to this unit, you can
operate this function.
% Touch AUTO ANT MODE on the initial
menu to turn the auto antenna mode off.
The vehicle’s antenna will be extended and the
source will be switched to Telephone every
time you receive an incoming call.
# To turn the auto antenna mode on, touch
AUTO ANT MODE again.
Initial Setup
En
110
Section
23