Filter
Top Products
Scanning CDs and tracks
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using M-CD, the
beginning of the first track of each disc is
played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch SCAN on the function menu to
turn scan play on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
3 When you find the desired track (or
disc) touch SCAN again.
Note
After track or disc scanning is finished, normal
playback of the tracks will begin again.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs. (With
multi-CD players sold before the CDX-P1250
and CDX-P650, up to 24 tracks can be stored
in the playlist.)
1 Play a CD that you want to program.
Touch a or b to select the CD.
2 Touch ITS MEMORY on the function
menu.
3 Touch c or d to select the desired
track.
4 Touch MEMORY to store the currently
playing track in the playlist.
MEMORY is displayed and the currently play-
ing selection is added to your playlist. The dis-
play then shows track number again.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch ITS PLAY on the function menu
to tur n ITS play on.
Playback begins of those tracks from your
playlist within the previously selected M-CD or
DISC ranges.
# If no tracks in the current range are pro-
grammed for ITS play, then ITS EMPTY is dis-
played.
# To turn ITS play off, touch ITS PLAY again.
Multi-CD Player
En
51
Section
11
Multi-CD Player