Filter
Top Products
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P01—P12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01—P12 until the pre-
set number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
or y.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switch between P01–P06 and P07–P12,
touch
or .
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P01–P06 and P07–P12 are not dis-
played, you can display them by touching LIST.
Notes
! Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P01—P12.
Introduction of advanced
TV tuner operation
1
1 Function display
Shows the function names.
1 Touch AUDIO MENU to display MENU.
MENU appears on the display.
# You can also display MENU by clicking the
joystick on the remote control.
2 Touch FUNCTION to display the func-
tion names.
The function names are displayed and oper-
able ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the TV picture, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.
TV tuner
En
66
Section
15