Philips DTR 7510 Stereo Receiver User Manual


 
37UsemoreofyourDigitalTerrestrialReceiver
ENGLISH
PIN Code
To change your PIN Code:
Enter your PIN Code.
Enter your new PIN Code.
Enter your new PIN Code again.
Note
OnceyouhavechangedyourPINCode,keep
itsecrettopreventothersfromusingit.Ifyou
forgetorloseyourPINCode,refertochapter
Frequentlyaskedquestions.
Note
ThePINCodedefaultvalueis0000.
5.9.3 Installation
Once you are in the Settings menu, select
Installation using the / arrowkeys.
Press OK.
This menu is used to:
•Manage channel installation
•Position your antenna - Test signal level and
quality
•ManagetheHardDiskDrive
•Checksoftwareupgradesandinformation
•Restore the Digital Terrestrial Receiver
factorysettings.
Disabling Hard drive is a way to reduce Fan
noise.HDDisasourceofheatandnotusingit
reducestheneedforusingtheinternalfan.
Channel installation
This sub-menu is used to manage channel
installation and update TV/Radio services in the
main list
•Update installation: manual update
•Full installation: choose between fast,
(recommanded) automatic and
advanced. (long) see Retune page 11
•Erase channel lists: Use this option to
deleteallchannelsandfavoritelists.
Antenna setting
Thissub-menuisusedtocheckthesignallevel
andquality.Ifthesignalpowerandqualityisnot
adequate,adjustyourantenna.
Note
ForinformationontheUHFchannelsavailablein
yourarearefertoyourlocaldealer.
Hard disk drive
•Recordles:pressOK to delete all
•Formatdisk:pressOKtoformatdisk
•Harddiskdrive:usethe / arrow
keystoenableordisableHardDiskDrive.
Note
•DisablingtheHardDiskDrivealsodisables
alltherecordingfunctionsandTimeShift
Bufferfunctions.Youwon’tbeableto
access the recorded programmes.
•InformationontheHDDreferenceand
capacity is displayed in the bottom right
corner.
DTR 7510 200910.indd 37 16/10/2009 17:41:06