Philips DTR7510/05 Stereo Receiver User Manual


  Open as PDF
of 60
 
Getting started12
Use the / arrowkeystohighlight
Installation.
Press OK.
Use the / arrowkeystohighlight
Full installation.
Press OK.
OnscreenScanmodeselection,select
Scan type fast.
Note
IfthenumberofTV/Radiostaysat0value,
refertochapter10 Frequently asked questions.
Youcouldtryagainfromthisstep,choosing
Scantypeautomatic, or advanced but it
couldtakemorethan30minutes.
Iftheproblemremains,contactyourdealer.
ScreenScanmodeselection:
Press OK.
Thescanprocessdisplayschannelsfoundwith
signallevelandquality.ofallsourcesanalysed
Note
Ifsignallevelstayslowandred,duringthefull
scanoperation,checkthecables.
IfPowerseemsokbutQualityindicatorstays
lowandred,checktheavailabilityofdigital
signalsinyourarea.Ifyouaresupposedto
haveaccesstodigitalsignal,checkyouraerial
installation.
Ifsomelocalvariantexist,theseextrachannels
will start with number 800.
Whenthescanisnished,yourDigital
Terrestrial Receiver display again the screen
ofscanmodeselection.PressExit
Enjoy your Digital Terrestrial Receiver.
DTR 7510 200910.indd 12 16/10/2009 17:40:51
 previous next