Philips DTR7510/05 Stereo Receiver User Manual


  Open as PDF
of 60
 
Getting started10
3.2 Connect
Danger
Riskofelectricshock!
Makesureallthedevicesaredisconnectedfrom
themainsbeforemakinganyconnections.
SCART connection
UsethisconnectionifyourTVsetisnottted
with a HDMI input.
Connecttheaerialcablefromthewall
sockettotheRF IN socketattherearof
the Digital Terrestrial Receiver.
Connect the RF OUT socketattherear
oftheDigitalTerrestrialReceivertotheRF
inputofyourTVsetusingaRFcable.
Connect the supplied scart cable to the
scartinputoftheTVsetandtothe TV scart
socketattherearoftheDigitalTerrestrial
Receiver.
Plug your TV set to the mains. Do not plug
your Digital Terrestrial Receiver yet!
Note
The fan extracts hot air from the device:
Check that there is enough place and
fresh air around the device to avoid
overheating.
HDMI connection
UsethisconnectionifyourTVsetisttedwith
a HDMI input.
Connecttheaerialcablefromthewall
sockettotheRF IN socketattherearof
the Digital Terrestrial Receiver.
Connect the RF OUTsocketattherear
oftheDigitalTerrestrialReceivertotheRF
inputofyourTVsetusingaRFcable.
Connect a HDMI cable to the HDMI input
oftheTVsetandHDMIsocketattherear
oftheDigitalTerrestrialReceiver.
Plug your TV set to the mains. Do not plug
your Digital Terrestrial Receiver yet!
Note
The HDMI cable is not supplied
3.3 Install
Beforeyoustartinstallation,makesureyouhave
made all the required connections.
SwitchonyourTVsetandselectthecorrect
source(refertotheusermanualofyourTVset).
Note
ThedisplayformatbeingmanagedbytheDigital
TerrestrialReceiver,setyourTVto“fullscreen”
or to the similar equivalent setting.
Plug the power cord into the mains and
settheswitchattherearoftheDigital
Terrestrial Receiver to position ON.
DTR 7510 200910.indd 10 16/10/2009 17:40:49
 previous next