Filter
Top Products
41
RQT9129
Card Page
iPod operation
Radio
Wireless system
Other difficulties with playback
The capacity of the SD card
decreased.
≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot,
data may be written to the SD card. Erase the data by using “BD-Video Data Erase”, format
the card or use a new card.
24
MPEG-2 motion pictures and
music on an SD card cannot be
played.
≥Data that can be played from an SD card are AVCHD and JPEG data. 12
The contents of the card
cannot be read.
≥The card is not compatible or the contents on the card may be damaged.
≥Turn off and then turn on the unit again.
12
—
Cannot charge or operate. ≥Check that the iPod is connected firmly.
≥The battery of the iPod is depleted. Charge the iPod, and then operate again.
20
—
Cannot display iPod videos/
photos on the TV.
≥Make sure that TV is connected to the VIDEO OUT terminal on this unit.
≥Operate the iPod menu to make the appropriate video/photo output settings for your TV.
(Refer to operating instructions for your iPod.)
7
—
Distorted sound or noise is
heard. “ST” flickers or does not
light.
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
—
36
A beat sound is heard. ≥Turn the TV off or move it away from the unit. —
A low hum is heard during AM
broadcasts.
≥Separate the antenna from other cables. —
No sound. ≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥Ensure that the wireless system is plugged into the house hold AC outlet and is turned on.
Then, check that “[W2S]” or “[W4S]” is displayed on the main unit’s display.
≥Ensure that surround selector at the rear of the wireless system is set to the center position.
≥Perform the steps bellow.
1 While pressing the [9/5] on the main unit, press the numbered button [3] on the
remote control until “P” lights in the main unit’s display.
≥The indicator on the wireless system turns green.
2 While “P” is displayed, press [I/D SET] on the rear of the
wireless system.
≥If “P” goes off before you press [I/D SET], repeat step 1
and then continue the procedure.
3 While pressing [9/5] on the main unit, press the
numbered button [3] on the remote control.
≥“[W2S]” or “[W4S]” lights on the main unit.
4 Turn off and on the wireless system.
≥Make sure the indicator on the wireless system lights up green.
6
8, 9
6
—
The indicator on the wireless
system keeps flashing between
red and green.
≥There is a power supply problem. Consult the dealer. —
Audio and video momentarily
pause.
≥This occurs between playlist chapters or scenes ([AVCHD]).
≥When playing a title recorded on both layers, the unit automatically switches between layers
and plays the title in the same way as a normal program. However, video and audio may
momentarily cut out when the unit is switching layers.
—
—
BD-Video or DVD-Video is not
played.
≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is
not defective.
≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
≥Some BD-Video can only be output with HDMI.
Cover
32
—
Picture-in-picture is not played
with BD-Video.
≥Confirm whether the disc supports picture-in-picture.
—
The virtual package is not
played with BD-Video.
≥Confirm whether the disc supports the virtual package.
≥The inserted SD card does not have sufficient available capacity.
≥The SD card is write-protected.
≥Sub contents copied to an SD card are provided by the disc producer as a part of the
BD-Video content. Even if you record images and audio onto an SD card, it cannot be played
as a virtual package.
24
—
12
24
Alternative soundtrack and
subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on
some discs. Use the disc’s menus to make changes.
—
14, 24
No subtitles. ≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.
≥When progressive output is on, closed captions cannot be displayed.
—
30
—
The subtitles overlap closed
captions recorded on discs.
≥Turn off the subtitles or turn off the closed caption setting on the TV. 30
Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —
The resume play function does
not work.
≥Memorized positions are canceled when
–pressing [∫] several times.
–opening the disc tray.
≥The resume play function may not work depending on the disc.
—
—
I/D SET
Use a pointed
object.
Reference
SC-BT100P-ENG.book 41 ページ ２００８年２月２０日 水曜日 午後６時２２分