Panasonic PT-DZ16KD Home Theater System User Manual


 
Chapter 6Appendix — Precautions for attaching the ceiling mount bracket
174 - ENGLISH
Precautions for attaching the ceiling mount bracket
f When installing the projector onto a ceiling, be sure to use the specied optional Ceiling mount bracket (Model No.: ET-PKD510H (for high
ceilings), ET-PKD510S (for low ceilings)).
f When installing the projector, attach the drop-prevention set that comes with the ceiling mount bracket to the projector. If you need the drop-
prevention set (hex bolt with washer (M10 x 40), wire rope: TTRA0143) separately, consult your dealer.
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by
Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualied technician.
f Referring to the following screw holes for ceiling mount diagram, use screws of sufcient length to reach the embedded nuts.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use electric screwdrivers or
impact screwdrivers.
f Read the Installation Instructions for the ceiling mount bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
M6
M6
Bottom view
Model No. of Ceiling mount bracket: ET-PKD510H (for high ceilings)
ET-PKD510S (for low ceilings)
Torque: (M6) 4 ± 0.5 N·m
Screw holes for ceiling mount
Thread engagement depthMax. screw hole depth
Max. screw hole depth
Embedded nut (Thread engagement
depth)
Space
Unit: mm
25 (31/32")
30 (1-3/16")
12 (15/32")
12 (15/32")
30 (1-3/16")